Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
next PZ lens test report: Samyang 35mm f/1.4 AS UMC
#31
But Samyang needs to come into the 21st century and give us at least screw-driven AF and lever-controlled aperture for Nikon/Sony/Pentax.

[/quote]

SAMYANG pentax versions work as A lenses, i.e. aperture is recorded to the exif and you can dial aperture from camera automatically, also focus confirmation works and all exposure modes are usable. With 14 mm focusing is not big issue anuway. Screwdrive would be nice of couse
  


Messages In This Thread
next PZ lens test report: Samyang 35mm f/1.4 AS UMC - by DenisLV - 06-24-2011, 12:21 PM
next PZ lens test report: Samyang 35mm f/1.4 AS UMC - by DenisLV - 06-24-2011, 12:47 PM
next PZ lens test report: Samyang 35mm f/1.4 AS UMC - by Guest - 06-24-2011, 12:57 PM
next PZ lens test report: Samyang 35mm f/1.4 AS UMC - by DenisLV - 06-24-2011, 06:11 PM
next PZ lens test report: Samyang 35mm f/1.4 AS UMC - by netrex - 06-24-2011, 06:55 PM
next PZ lens test report: Samyang 35mm f/1.4 AS UMC - by DenisLV - 06-24-2011, 09:24 PM
next PZ lens test report: Samyang 35mm f/1.4 AS UMC - by DenisLV - 06-24-2011, 09:28 PM
next PZ lens test report: Samyang 35mm f/1.4 AS UMC - by Guest - 06-24-2011, 10:04 PM
next PZ lens test report: Samyang 35mm f/1.4 AS UMC - by Guest - 06-24-2011, 11:38 PM
next PZ lens test report: Samyang 35mm f/1.4 AS UMC - by netrex - 06-24-2011, 11:50 PM
next PZ lens test report: Samyang 35mm f/1.4 AS UMC - by Guest - 06-25-2011, 12:25 AM
next PZ lens test report: Samyang 35mm f/1.4 AS UMC - by Yakim - 06-25-2011, 04:25 PM
next PZ lens test report: Samyang 35mm f/1.4 AS UMC - by gunnar - 06-25-2011, 07:46 PM
next PZ lens test report: Samyang 35mm f/1.4 AS UMC - by gunnar - 06-25-2011, 08:38 PM
next PZ lens test report: Samyang 35mm f/1.4 AS UMC - by gunnar - 06-25-2011, 09:00 PM
next PZ lens test report: Samyang 35mm f/1.4 AS UMC - by kadarpik - 06-26-2011, 12:41 PM
next PZ lens test report: Samyang 35mm f/1.4 AS UMC - by AnKOu - 09-01-2013, 08:39 PM

Forum Jump:


Users browsing this thread:
1 Guest(s)