04-10-2018, 01:40 PM
No they don't really distort cylindrical objects that way. If you place them close to the edge of the frame, they will but that's with every single wide angle lens. Actually you can then shift the lens to counter that distortion.
Also, (according to some back of the hand calculations) 8.5 degrees of tilt is probably enough to tilt the plane of focus to a 65 degrees at a focus distance of half a meter.
Also, (according to some back of the hand calculations) 8.5 degrees of tilt is probably enough to tilt the plane of focus to a 65 degrees at a focus distance of half a meter.