Was just reading this tutorial on Dpreview
https://www.dpreview.com/articles/072769...any-camera
they noted "
Pentax K-1 II's new hand-held Pixel Shift mode which combines four images to create a 'super resolution' file in-camera with better detail, dynamic range and lower noise. "
it seems stacking multiple photos can increase dynamic range but how ? it they are taken with the same exposure settings ?
Because you capture 4x the light, that is why.
Or (iow): DR gets determined by establishing a noise floor, and then seeing when that noise floor gets reached. By taking 4 samples and averaging them, you also average the noise per pixel, and the result is a higher DR.
(04-27-2018, 09:36 AM)Brightcolours Wrote: [ -> ]Because you capture 4x the light, that is why.
Or (iow): DR gets determined by establishing a noise floor, and then seeing when that noise floor gets reached. By taking 4 samples and averaging them, you also average the noise per pixel, and the result is a higher DR.
didn't get it, too complicated to me can you explain more please ?
BC's explanantion is absoultely correct and rather straightforward to understand. If you have problems with it, try for yourself.
DPReview gave a good recipe to do the same what Pentax K1 could do with one push of the release button, but occassional artefacts with 4 pushs, more post-work but no artefacts. Just don't fprget to enlarge the file to 200%.
Never said BC was not correct, just I didn't get it, Xan someone explain that in a simple way I could understand?
(04-27-2018, 03:35 PM)toni-a Wrote: [ -> ]Never said BC was not correct, just I didn't get it, Xan someone explain that in a simple way I could understand?
well, to make it simple, take 4 times the same picture. Now, every pixel has a bit of noise. In dark areas, the light signal is so week, it's difficult to see what is the image and what is noise.
let's take a single pixel. It should have, for example, a grey value of 12 ideally, but with noise in one image it's 15, in another it's 11, then 9, last 13. Now you average the 4 pixels, the noise will be less because you average over 4 frames. So, totally, you decrease the noise in the image, which increases the DR, since you have now more good information in the dark regions.