TOKINA 20-35MM F2.8 HOOD - Printable Version +- Opticallimits (https://forum.opticallimits.com) +-- Forum: Forums (https://forum.opticallimits.com/forumdisplay.php?fid=4) +--- Forum: Just Talk (https://forum.opticallimits.com/forumdisplay.php?fid=17) +--- Thread: TOKINA 20-35MM F2.8 HOOD (/showthread.php?tid=1943) |
TOKINA 20-35MM F2.8 HOOD - HenriCartierShufflebottom - 04-09-2013 Does anyone have access to a Tokina lens hood BH-771 (or I believe a BH-774) and also have the ability to make a template on an A4 word document? I have tried many 3rd party hoods but all seem to vignette. Perhaps if someone has the ability to trace the hood onto an A4 page I can use this to make one? thanks for reading Ian TOKINA 20-35MM F2.8 HOOD - Brightcolours - 04-09-2013 I believe it is the BH-771 or BH-773 you are looking for (not the 774). The BH-771 was also used for the 28-70 f2.6-2.8mm? You can still find the BH-771 on for instance ebay. Or you can print one of these, maybe the 28-70mm f2.8 will fit, or the 774 from the 19-35mm f3.5-4.5. Or you can adapt one of these. http://www.lenshoods.co.uk/tokina.php TOKINA 20-35MM F2.8 HOOD - HenriCartierShufflebottom - 04-09-2013 Thanks Brightcolours. You are correct in that it is the BH-771 and BH-773 (not 774). If I spot one cheap enough on eBay I will go for it. However many thanks for the fab link to the patterns. I will try and make one. regards Ian |