So far I have been able to ensure that my Nikkor 50mm f1.4 and my Nikkor 35mm F2 are perfectly centered fully open. I tried through the viewfinder instead of in live view and it also works fine, although you maybe don't see the development quite as clearly, but the VF of the D700 is so luminous that it was no problem. Easier in a store to just use the viewfinder of course. I am quite confident of my primes, but the zooms from Sigma and Tamron may be a diffrent story. I'll keep you posted.
I have now also tried the 105mm f2.8 and the Sigma 24-70 f2.8 and they both seem absolutely fine, allthough I just use the viewfinder. I'll try it all with the tripod later, but I do not expect any different results.<img src='http://forum.photozone.de/public/style_emoticons/<#EMO_DIR#>/cool.gif' class='bbc_emoticon' alt='B)' />
[quote name='Vieux loup' timestamp='1302094090' post='7448']
I tried through the viewfinder instead of in live view and it also works fine, although you maybe don't see the development quite as clearly, but the VF of the D700 is so luminous that it was no problem.
[/quote]
The viewfinder, especially when not used from a tripod, will not allow reliable results. As Klaus described, one should use a stable tripod and LiveView with large magnification to be sure a lens is ok.
-- Markus
Editor
opticallimits.com
[quote name='mst' timestamp='1302096663' post='7449']
The viewfinder, especially when not used from a tripod, will not allow reliable results. As Klaus described, one should use a stable tripod and LiveView with large magnification to be sure a lens is ok.
-- Markus
[/quote]
Yep, the viewfinder is rather useless for this.
Hi Klaus,
I understood everything except point 6. - MAINTAIN the 5 degree tilt of the edges!
What does it mean?
Kind regards
Denis
[quote name='DenisLV' timestamp='1345794733' post='19848']
I understood everything except point 6. - MAINTAIN the 5 degree tilt of the edges!
[/quote]
In the testimage, the lines are not horizontal and vertical. they are rotated by
5 degrees.
Now, if you setup your camera on the tripod, you could easily apply the
same 5 degrees to the camera so that the lines in the resulting image
would be vertical and horizontal ...
Point 6 says: Do NOT do this ... keep the camera horizontal, so that
the image taken withg the camera shows the same 5 degrees
rotation that was also on the testimage on the computerscreen.
[quote name='Rainer' timestamp='1345833771' post='19850']
In the testimage, the lines are not horizontal and vertical. they are rotated by
5 degrees.
Now, if you setup your camera on the tripod, you could easily apply the
same 5 degrees to the camera so that the lines in the resulting image
would be vertical and horizontal ...
Point 6 says: Do NOT do this ... keep the camera horizontal, so that
the image taken withg the camera shows the same 5 degrees
rotation that was also on the testimage on the computerscreen.
[/quote]
Thanks Rainer
Great info. Thank you.
www.oukiphoto.com