• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Forums > Back > Speedlite 300EZ
Rainer
Senior Member
****
Joined: Apr 2010
Posts: 430

Reputation: 0
#2
08-20-2010, 11:52 AM (This post was last modified: 08-20-2010, 11:52 AM by Rainer.)
Flashes of the "EZ" Series support the old "TTL" method, but not the new "ETTL" or "ETTL-2"

methods that all newer digital cameras require. Therefore, the EZ will only be usable if

you select the power-output of the flash manual (on the flash) or (if manual selection is

not possible) you use the flash at full power and do the guidenumber by distance

calculation to find out an appropriate aperture.



I would recommend to use a flash that is compatible to ETTL ... if you stay with

Canon, this would be an "EX" Series flash.



Just my 2cts ... Rainer
  Reply


Messages In This Thread
Speedlite 300EZ - by Steinar1 - 08-20-2010, 11:35 AM
Speedlite 300EZ - by Rainer - 08-20-2010, 11:52 AM
Speedlite 300EZ - by Steinar1 - 08-20-2010, 01:02 PM
Speedlite 300EZ - by Rainer - 08-20-2010, 02:10 PM
Speedlite 300EZ - by Guest - 08-20-2010, 05:14 PM
Speedlite 300EZ - by Steinar1 - 08-20-2010, 08:50 PM
Speedlite 300EZ - by wim - 08-20-2010, 10:51 PM
Speedlite 300EZ - by Rainer - 08-21-2010, 04:15 AM
Speedlite 300EZ - by Steinar1 - 08-21-2010, 10:46 AM
Speedlite 300EZ - by Steinar1 - 08-21-2010, 03:49 PM
Speedlite 300EZ - by wim - 08-21-2010, 06:45 PM
Speedlite 300EZ - by mst - 08-22-2010, 08:31 AM
Speedlite 300EZ - by Steinar1 - 08-22-2010, 09:11 AM

Forum Jump:


Users browsing this thread: 3 Guest(s)