Opticallimits > Forums > Just Talk > Holding all the bits in place….
Opticallimits > Forums > Just Talk > Holding all the bits in place….

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thread Modes
Holding all the bits in place….
Brightcolours Offline
All-Star
*****
Posts: 6,715
Threads: 236
Joined: Apr 2010
Reputation: 22
#22
03-23-2015, 08:57 PM
What I found is that it was a C-mount lens designed for 1/2 inch video tubes? That would then be for a recording area of about 6.4x4.8mm. 11 Size

 

In that usage it would then be equivalent to a 67.5mm lens on 135 format (not taking into account the different aspect ratios). For 16mm film it would then be equivalent to a 35mm lens on 135 format.

 

I believe the 1st commercial lens for photography with an aspherical element was the Canon FD 55mm f1.2 Aspherical. This lens still has a cult following keeping prices pretty high still.

https://www.flickr.com/groups/canon-fd-55-12/

It does much better wide open/close up than my FL 55mm f1.2, but its bokeh is not a real winner (depending on the distance).

Find
Reply
  


Messages In This Thread
Holding all the bits in place…. - by soLong - 03-17-2015, 09:57 PM
Holding all the bits in place…. - by JJ_SO - 03-18-2015, 06:13 AM
Holding all the bits in place…. - by soLong - 03-19-2015, 02:04 AM
Holding all the bits in place…. - by Scythels - 03-19-2015, 04:32 AM
Holding all the bits in place…. - by JJ_SO - 03-19-2015, 06:20 AM
Holding all the bits in place…. - by Scythels - 03-19-2015, 06:39 PM
Holding all the bits in place…. - by davidmanze - 03-19-2015, 06:40 PM
Holding all the bits in place…. - by JJ_SO - 03-19-2015, 09:09 PM
Holding all the bits in place…. - by Scythels - 03-20-2015, 12:31 AM
Holding all the bits in place…. - by JJ_SO - 03-20-2015, 08:32 AM
Holding all the bits in place…. - by Scythels - 03-20-2015, 05:35 PM
Holding all the bits in place…. - by JJ_SO - 03-20-2015, 07:07 PM
Holding all the bits in place…. - by Scythels - 03-20-2015, 10:57 PM
Holding all the bits in place…. - by popo - 03-20-2015, 11:50 PM
Holding all the bits in place…. - by Scythels - 03-21-2015, 05:36 AM
Holding all the bits in place…. - by JJ_SO - 03-23-2015, 05:56 AM
Holding all the bits in place…. - by Scythels - 03-23-2015, 04:18 PM
Holding all the bits in place…. - by Scythels - 03-23-2015, 05:53 PM
Holding all the bits in place…. - by Scythels - 03-23-2015, 07:35 PM
Holding all the bits in place…. - by Brightcolours - 03-23-2015, 08:57 PM
Holding all the bits in place…. - by Scythels - 03-24-2015, 01:18 AM

Forum Jump:


Users browsing this thread:
1 Guest(s)