Thread Rating:
  • 1 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Z50 in the lab soon
#5
... and the 30-110 is a telezoom lens Wink

Usually I don't mind a bit of dust, but here were fibers involved of which I have no idea how they made it to the inside - I mean, I could not open the front group.

In terms of lenshood I agree, it is a good bump protector and much better than filters.

I got a second 1 V2 with three lenses. Before I got the 1 V2 with 10-100 (that one has a metal barrel as Zoom ring) and the 70-300 (again, metal barrel). The kit lenses are a different league (not surprisingly). And I don't see metal as superior in each case, I even admire the design work involved in the housing and functions - but the tolerances are huge because else it would not work.

On second thought, the smaller the sensor, the shorter the FL and the sooner dust particles of a certain size (and close to the sensor) can appear, when aperture is stopped down. Anyway, the 10-100 (the non-PD version) appears to be better made, so I would not use the plasticky 30-110 anyway. And I was curious about it's inner structure.

And of course, Marcus, I opened up every lens in my posession to check wether it's plastic or not Wink. As you apparently also did because you know things like "Screws going into plastic constructions is the rule..." Big Grin

On a more serious base: Could you explain why so many Z-glass (14-30, 24-70) needs to be extended first before you can use it? Can't imagine this to be cheaper or more reliable than a body in the "extended" size already would be. More compact? Yes, but regarding the 14-30 I usuallly turn it in the wrong direction to make it transport ready.
  


Messages In This Thread
Z50 in the lab soon - by mst - 12-05-2019, 12:24 AM
RE: Z50 in the lab soon - by JJ_SO - 12-05-2019, 07:19 AM
RE: Z50 in the lab soon - by mst - 12-05-2019, 08:41 AM
RE: Z50 in the lab soon - by davidmanze - 12-06-2019, 04:03 AM
RE: Z50 in the lab soon - by mst - 12-08-2019, 12:35 AM
RE: Z50 in the lab soon - by Rover - 12-08-2019, 02:49 PM
RE: Z50 in the lab soon - by Brightcolours - 12-05-2019, 08:55 AM
RE: Z50 in the lab soon - by JJ_SO - 12-05-2019, 09:23 AM
RE: Z50 in the lab soon - by mst - 12-05-2019, 10:37 AM
RE: Z50 in the lab soon - by JJ_SO - 12-05-2019, 11:56 AM
RE: Z50 in the lab soon - by giulio - 12-20-2019, 08:31 AM
RE: Z50 in the lab soon - by mst - 12-21-2019, 07:54 PM
RE: Z50 in the lab soon - by thxbb12 - 12-21-2019, 08:19 PM
RE: Z50 in the lab soon - by mst - 12-21-2019, 08:29 PM
RE: Z50 in the lab soon - by JJ_SO - 12-21-2019, 09:37 PM
RE: Z50 in the lab soon - by mst - 12-22-2019, 11:34 AM
RE: Z50 in the lab soon - by JJ_SO - 12-22-2019, 01:20 PM
RE: Z50 in the lab soon - by mst - 12-22-2019, 01:42 PM
RE: Z50 in the lab soon - by thxbb12 - 12-21-2019, 08:49 PM
RE: Z50 in the lab soon - by Brightcolours - 12-22-2019, 12:35 PM
RE: Z50 in the lab soon - by mst - 12-22-2019, 01:11 PM
RE: Z50 in the lab soon - by JJ_SO - 12-22-2019, 02:49 PM
RE: Z50 in the lab soon - by mst - 12-23-2019, 07:20 AM
RE: Z50 in the lab soon - by JJ_SO - 12-23-2019, 09:10 AM
RE: Z50 in the lab soon - by ExtraLargeFormat - 12-26-2019, 02:52 PM
RE: Z50 in the lab soon - by mst - 12-27-2019, 04:49 PM
RE: Z50 in the lab soon - by davidmanze - 12-28-2019, 07:06 AM
RE: Z50 in the lab soon - by JJ_SO - 12-28-2019, 09:27 AM

Forum Jump:


Users browsing this thread:
1 Guest(s)