Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Holding all the bits in place….
#5
@SoLong there will always be people like you strongly believe in "the lens would be better without VR". Let's just say, no none of us can do a comparison between an existing and a non-existing lens. There also will always be people begging for VR even in wide angle zooms. And there will be people like me, happy with a VR-switch on longer lenses. If I switch it off, I hear and feel something like a clutch falling in place. The advantages of a steady finder are high enough to let go some phantom sharpness which nobody can prove to be real.

 

@Scythels I really don't care which Japanese company stole from another Japanese company as all of them did steal a lot of German manufacturers. If Sigma cuts a bit of Nikon's profits, I'm fine with as I'm benefitting of Sigma's improved OS. Let's talk again about VR vs OS once I get the 150-600 Sports to compare it with 300/4E PF once I have it back from repair because of malfunctioning VR. But so far my experiences are:

 

Sigma's OS works better in one lens I have than any other Nikon VR of three lenses. I can use longer shutter speeds and still get sharper results.

Sigma's way of 100% check with Foveon sensor based measuring devices also lead to better and sharper lenses than any Nikkor I have (and I have a couple of expensive ones) - at considerably lower prices.

 

Maybe it's time for Nikon to learn from a better company? Call it stealing if you need  - a thieve only could copy it. Sigma improved it as it appears to me.

  


Messages In This Thread
Holding all the bits in place…. - by soLong - 03-17-2015, 09:57 PM
Holding all the bits in place…. - by JJ_SO - 03-18-2015, 06:13 AM
Holding all the bits in place…. - by soLong - 03-19-2015, 02:04 AM
Holding all the bits in place…. - by Scythels - 03-19-2015, 04:32 AM
Holding all the bits in place…. - by JJ_SO - 03-19-2015, 06:20 AM
Holding all the bits in place…. - by Scythels - 03-19-2015, 06:39 PM
Holding all the bits in place…. - by davidmanze - 03-19-2015, 06:40 PM
Holding all the bits in place…. - by JJ_SO - 03-19-2015, 09:09 PM
Holding all the bits in place…. - by Scythels - 03-20-2015, 12:31 AM
Holding all the bits in place…. - by JJ_SO - 03-20-2015, 08:32 AM
Holding all the bits in place…. - by Scythels - 03-20-2015, 05:35 PM
Holding all the bits in place…. - by JJ_SO - 03-20-2015, 07:07 PM
Holding all the bits in place…. - by Scythels - 03-20-2015, 10:57 PM
Holding all the bits in place…. - by popo - 03-20-2015, 11:50 PM
Holding all the bits in place…. - by Scythels - 03-21-2015, 05:36 AM
Holding all the bits in place…. - by JJ_SO - 03-23-2015, 05:56 AM
Holding all the bits in place…. - by Scythels - 03-23-2015, 04:18 PM
Holding all the bits in place…. - by Scythels - 03-23-2015, 05:53 PM
Holding all the bits in place…. - by Scythels - 03-23-2015, 07:35 PM
Holding all the bits in place…. - by Scythels - 03-24-2015, 01:18 AM

Forum Jump:


Users browsing this thread:
1 Guest(s)