My new Nikkor 10-24 mm has bad extreme corners resolution (Imatest MTF 0,17 only at radius 12,7 mm instead 0,43 Nikon web specification).
The resolution at all corners is appr the same, therefore I think that it is not the problem of lens centering. I am persuated that I have bought defective copy of Nikkor 10-24 mm. The practical test shots are in attachment (1:1 crops of center + all corners + all extreme corners).
Prague Nikon service recommended me to send lens for warranty repair (repair shoud be made at Nikon Europe Service, specialised for 10- 24 lens, after Nikon internals tests)
Has somebody experience with repair of simillar problem (Nikkor 10-24 symetrical poor extreme corners resolution)?
I am afraid to send new lens for such repair because I could not realize how could it made. I am afraid that the result of "repair" could be worse than the present state.
Many thank for relevant comments.
For me, whenever a lens behaved poorly, it was asymmetrical. So, maybe what you're seeing is normal. Do things improve upon stopping down?
Sharpnes at F 5,6 is only a litle better, see attachment.
I think that extreme corner resolution 15 lp/mm (MTF50) of my lens instead circa 30 lp/mm of reference lens is dramatically diference. I will be satiesfied with 25 lp/mm at F 3,5.
[quote name='pavol' timestamp='1293404804' post='5215']
Sharpnes at F 5,6 is only a litle better, see attachment.
I think that extreme corner resolution 15 lp/mm (MTF50) of my lens instead circa 30 lp/mm of reference lens is dramatically diference. I will be satiesfied with 25 lp/mm at F 3,5.
[/quote]
What's your reference lens? I think the lens photozone tested also only delivered 20 lp/mm (I hope my math is correct - 950 lwph, 24 mm image height, divide by two for line pairs) in the corners at 10 mm wide open.
Do you adjust for field curvature?
Posts: 6,715
Threads: 236
Joined: Apr 2010
Reputation:
22
[quote name='pavol' timestamp='1293376453' post='5208']
My new Nikkor 10-24 mm has bad extreme corners resolution (Imatest MTF 0,17 only at radius 12,7 mm instead 0,43 Nikon web specification).
The resolution at all corners is appr the same, therefore I think that it is not the problem of lens centering. I am persuated that I have bought defective copy of Nikkor 10-24 mm. The practical test shots are in attachment (1:1 crops of center + all corners + all extreme corners).
Prague Nikon service recommended me to send lens for warranty repair (repair shoud be made at Nikon Europe Service, specialised for 10- 24 lens, after Nikon internals tests)
Has somebody experience with repair of simillar problem (Nikkor 10-24 symetrical poor extreme corners resolution)?
I am afraid to send new lens for such repair because I could not realize how could it made. I am afraid that the result of "repair" could be worse than the present state.
Many thank for relevant comments.
[/quote]
While the Nikon 10-24mm is not super at 10mm, it is not particularly bad either, and I have not seen it this bad as your examples. As far as I know, this is not normal at all, the lens should still be reasonably sharp in the corners.
I do not think any "repair" can make this worse, and if they find they can not repair it they just might give you a new lens.
Sorry, but @10mm wide open, corner softness such as this does not come exactly unexpected. looks entirely within expectations . Dont expect to measure same the lp/mm as Nikon does. Only they know under what conditions these reults ca be reached.
Posts: 6,715
Threads: 236
Joined: Apr 2010
Reputation:
22
[quote name='jenbenn' timestamp='1293562947' post='5252']
Sorry, but @10mm wide open, corner softness such as this does not come exactly unexpected. looks entirely within expectations . Dont expect to measure same the lp/mm as Nikon does. Only they know under what conditions these reults ca be reached.
[/quote]
That is not exactly true, try finding an f3.5 10mm sample online with that bad corners of this lens... you will find it hard.